Visual Investigation of Field Bed-Load Sampling
An instrument for bed load sampling was developed consisting of an underwater video camera for visual observations. This instrument is called the Delft-Nile sampler and its design, efficiency...
Strain Measurement on the Runner of a Hydroelectric Turbine
Twelve strain gages were installed on the 10-m-diameter runner of Unit G-23 (700 MW) at Grand Coulee Dam, Third Powerhouse. The gages were located on both the pressure and suction sides...
Non-Intrusive Experimental Setup for Inflatable Dam Models
A method which allows for a non-intrusive evaluation of the dynamic response of the inflatable dams under overflow and impounding water conditions is presented. The internal pressure variations...
Observations on the Growth of an Internal Boundary Layer with a Lidar Technique
The distribution of atmospheric water vapor across a step change in surface humidity (dry-wet) was observed by a Lidar measurement technique under neutral atmospheric stability condition....
Benefits of Hazard Mitigation Planning to Reduce Shoreline Impacts Due to Great Lakes Water Level Management Fluctuations and Severe Storms
Recent experience with flood hazard mitigation planning that encompassed aspects of pre-disaster preparedness and recovery operations have proven to be an effective tool in geographic...
Multi-Reservoir Systems Optimization by the Aggregation/Decomposition Methodology
Studies on long term optimization of multi-reservoir systems are enhanced by the availability of closed-loop policies as available in Stochastic Dynamic Programming (SDP). SDP offers a...
Hydro Plant Research Data Acquisition System
The Colton Hydroelectric Development, located on the Raquette River in the northwestern part of New York State, is the site of a two year research project to test the use of heated trashracks...
3D model verification for a groyne and harbor experiment
A discussion of 3D model verification and calibration based on measurements in a flume is carried out for different test cases (groyne, harbor). The measurement data is available for public...
Stochastic Control With Bounded Sample Paths: An Application to Reservoir Systems
The consideration of at least the first two statistical moments for the storage volumes of a reservoir system is crucial in an analysis aimed at determining the optimal operations policies...
Reforming Japan's Public Works
Japan's public works bidding system has traditionally been dominated by money politics and industry collusion, which has served to keep out small Japanese companies as well...
Reconstruction of the West Breakwater at Port Sines, Portugal
This volume,
Water on Stone
Schal Bovis, a Chicago construction-services firm, has shown that Japan is not entirely a closed market. With more than a dozen major Japanese projects under its belt, it has broken through...
Development of Mechanized Wet Mix Shotcrete Application in Norwegian Tunnelling Industry
From 1971 to 1980 wet mix shotcrete won the Norwegian market 100%. In the same period hand held spraying was replaced by hydraulic manipulators. From 1980 to 1986, steel fibre use increased...
Wet Mix Shotcrete Used in Subsea Tunnel Environments
To reject the claim that the use of accelerator in shotcrete reduces the compressive strength with time, lately cored samples were taken from an 18 to 19 years old concrete. A wet mixed...
Guidelines for Shotcreting and Current Development in the Wet-Mix Technique in Finland
Guidelines for shotcreting were written based on the literature survey and shotcreting trials. During shotcreting trials existing Norwegian and Middle-European wet-mix shotcreting concepts...
New Advances in Shotcrete Additives: The DELVO System
The DELVO system is a two component, nonchloride chemical system developed to control the dynamics of cement hydration. Concrete, treated with the DELVO system, can be kept in a plastic...
Advances in Dry Shotcrete Technology by Means of Microsilica
During the last decade microsilica has been increasingly used to improve both wet and dry mix shotcrete. In the traditional dry process microsilica is blended in the dry mixture. Since...
Various Techniques for Fiber Reinforcement
Placing wire netting in thin shotcrete layers was found to be a difficult, dangerous and time-wasting method. Searching for other ways to reinforce the concrete, it has been found that...
Advances in Shotcrete Technology for Support of Underground Openings in Canada
This paper presents a broad overview of the state-of-the-art of shotcrete technology for support of underground openings in Canada. Advances in shotcrete technology such as the introduction...
ASTM C666 (A) Freeze-Thaw Durability of Air-Entrained Wet- and Dry-Mix Shotcrete
In order to assess the freeze-thaw durability of shotcrete, six samples of dry-mix shotcrete and one sample of wet-mix shotcrete were mixed outdoors at Hydro-Quebec's research institute...
Return to search